The decoder itself requires less than 10mA when idle. The power requirement of the outputs depends on the connected item. We recommend a power supply with 2A. Long ending The decoders have a charging control so that the control center does not incorrectly diagnose a short circuit when starting. Social An address can be assigned multiple times. When the address is called up, all outputs that are assigned to this address are switched. Remote control The decoder can be configured directly at its location from a DCC control center using programming-on-main. All CVs can be updated. Small steps You can adjust the switching pulse individually. Switching pulses from 100ms to 25 seconds are possible. And this in small steps of 100ms. Forever Each output can be configured as continuous operation. Th.
