The decoder itself requires less than 5mA when idle. The power requirement of the output depends on the connected item. Remote control The decoder can be configured directly at its location from a DCC control center using programming-on-main. All CVs can be updated. inspection The decoder can be configured on a DCC programming track. All CVs can be read and written via direct mode. Scope The light bar can be used with various Light effects such as NEON or fade in can be equipped through CV programming It will be light But not too fast... You can adjust the dimming time individually. Dimming times of 10 to 2550 milliseconds are possible. And this in small steps of 10 milliseconds. Hot and cold There are 5 slots available where you can mix your own color temperatures and easily switch betwee.
