If your H & M Clipper is looking old and depressed, or has a nasty, dirty or damaged face, a new fascia may be what you are needing. Printed on metallic media and laminated so you can wipe the surface clean of oily (or sugary) deposits. You will need your sharpest knife to remove the cutouts ( You can use your old fascia as a template). Replacement Instructions: 1 Remove speed knob - gently but firmly grasp, and pull off. (There are no screws involved). 2 Remove the screw above the speed knob spindle. (These retain the fascia) 3 Remove the two screws retaining the feet, the bottom trim strip can then be removed. You can then slide the old fascia out. Reverse these instructions after you have inserted your new fascia.
