The reed contact board is used to automatically trigger sounds in sound decoders. Two different sounds can be activated using magnets in the tracks. Thanks to its special shape, it fits universally into many different LGB drive blocks. • Install the electronics carefully according to the connection plans. If cables are mixed up or cables are short-circuited during installation, this can lead to the destruction of the electronics. Attention, there is a risk of injury if the reed contacts break! Make sure there is adequate mechanical protection during handling and assembly. Especially if you do not mount the contact in the motor housing but openly underneath the locomotive, the contacts must be mechanically protected. • The module may only be used for the functions mentioned in the instructi.
