The decoder itself requires less than 10mA when idle. The power requirements of the outputs depend on the connected item. We recommend a 2A power supply. Artificial intelligence A little anyway. The decoder has an automatic learning mode for addressing. All you have to do is press a button and call up the desired addresses at your headquarters. Finished. Remote control The decoder can be configured directly at its place of use from a DCC center using Programming-on-Main. All CV's can be updated. Small steps You can set the switching pulse individually. Switching pulses from 100ms to 25 seconds are possible. And that in small steps of 100ms. Forever Each output can be configured as continuous operation. The selected port of an output is powered until the other port is activated. Turntable T.